Get sound to appear (YMMV based on card)

dotfiles/config/i3/.i3status.conf

@@ -1,10 +1,10 @@
 general {
-        output_format = "i3bar"
-        colors = true
-        color_good = "#a5d1ed"
-        color_bad = "#7F2F25"
-        color_degraded = "#87C2EA"
-        interval = 5
+  output_format = "i3bar"
+  colors = true
+  color_good = "#a5d1ed"
+  color_bad = "#7F2F25"
+  color_degraded = "#87C2EA"
+  interval = 1
 }
 
 order += "ipv6"
@@ -22,58 +22,66 @@ order += "tztime local"
 # order += "tztime berlin"
 
 wireless wlp3s0 {
-        format_up = "W: (%quality at %essid, %bitrate) %ip"
-        format_down = "W: down"
+  format_up = "W: (%quality at %essid, %bitrate) %ip"
+  format_down = "W: down"
 }
 
 ethernet eth0 {
-        # if you use %speed, i3status requires the cap_net_admin capability
-        format_up = "E: %ip (%speed)"
-        format_down = "E: down"
+  # if you use %speed, i3status requires the cap_net_admin capability
+  format_up = "E: %ip (%speed)"
+  format_down = "E: down"
+}
+
+volume master {
+  format = "♪: %volume"
+  format_muted = "♪: muted (%volume)"
+  device = "hw:1"
+  mixer = "Master"
+  mixer_idx = 0
 }
 
 battery 0 {
-        format = "%status %percentage %remaining %emptytime"
-        format_down = "No battery"
-        status_chr = "⚇ CHR"
-        status_bat = "⚡ BAT"
-        status_full = "FULL"
-        path = "/sys/class/power_supply/BAT%d/uevent"
-        low_threshold = 10
+  format = "%status %percentage %remaining %emptytime"
+  format_down = "No battery"
+  status_chr = "⚇ CHR"
+  status_bat = "⚡ BAT"
+  status_full = "FULL"
+  path = "/sys/class/power_supply/BAT%d/uevent"
+  low_threshold = 10
 }
 
 run_watch DHCP {
-        pidfile = "/var/run/dhcpcd*.pid"
+  pidfile = "/var/run/dhcpcd*.pid"
 }
 
 run_watch VPNC {
-        # file containing the PID of a vpnc process
-        pidfile = "/var/run/vpnc/pid"
+  # file containing the PID of a vpnc process
+  pidfile = "/var/run/vpnc/pid"
 }
 
 path_exists VPN {
-        # path exists when a VPN tunnel launched by nmcli/nm-applet is active
-        path = "/proc/sys/net/ipv4/conf/tun0"
+  # path exists when a VPN tunnel launched by nmcli/nm-applet is active
+  path = "/proc/sys/net/ipv4/conf/tun0"
 }
 
 tztime local {
-        format = "%Y-%m-%d %H:%M:%S"
+  format = "%Y-%m-%d %H:%M:%S"
 }
 
 tztime berlin {
-        format = "%Y-%m-%d %H:%M:%S %Z"
-        timezone = "Europe/Berlin"
+  format = "%Y-%m-%d %H:%M:%S %Z"
+  timezone = "Europe/Berlin"
 }
 
 load {
-        format = "Load: %5min"
+  format = "Load: %5min"
 }
 
 cpu_temperature 0 {
-        format = "T: %degrees °C"
-        path = "/sys/class/hwmon/hwmon2/temp1_input"
+  format = "T: %degrees °C"
+  path = "/sys/class/hwmon/hwmon2/temp1_input"
 }
 
 disk "/" {
-        format = "%free"
+  format = "%free"
 }

dotfiles/config/i3/config

@@ -129,7 +129,7 @@ bindsym $mod+Shift+0 move container to workspace 10
 
 # Window configurations
 for_window [class="^.*"] border pixel 1
-for_window [title="htop"] floating enable
+# for_window [title="htop"] floating enable
 
 # bind function keys
 bindsym XF86AudioMute           exec ponymix toggle